Adhesives for surgical drapes

Related
	1 / 2 2 / 2

Information request

More

MACtac® Medical Products has introduced its enhanced line of single-coated and double-coated pressure-sensitive adhesive systems, specifically designed for use in surgical drape application.

Converters are seeing an increased demand for optimal adhesion in drape-to-drape and drape-to-patient application as end users seek to lower the risk of surgical site infections (SSI). With an estimated 500,000 SSIs each year, U.S. health providers are constantly looking for ways to lower costs. MACtac's pressure-sensitive adhesive systems help with this, isolating the surgical site by providing a barrier that creates a sterile field - all without sacrificing patient comfort during removal.

Healthcare providers are pressured to decrease spending while improving patient care, MACtac Medical Products. Our new surgical drape adhesive assists customers with their budget and patient comfort requirements - and offers the ability to customize for specific applications.

MACtac's expanded platform increases the variety of substrates converters are able to work with, including spunlace, SMS, Kraton, and PE and EVA films.

See Mactac Medical Adhesive Offer

Reference	Short description	Adhesive	Liner	Thickness	Adhesive thickness	Technical Data sheet
TM 6563	Double-sided foam coated on two sides with acrylic based, hypoallergenic pressure sensitive adhesive. TM-6563 was designed for assembling medical devices where skin contact is possible. It exhibits good adhesion to polyethylene	SBMA	semi bleached kraft release liner	0.8 mm	63.5µ
TM 9947	Cross linked polyethylene foam coated on one side with acrylic based, hypoallergenic pressure sensitive adhesive. The adhesive is protected by a 80 gr white calendered release liner	SBA	white calendered release liner.	1 mm	50 µ
TM-1015	deep matte clear polyethylene film coated on one side with 25.5µ of acrylic medical grade adhesive, protected by 80 gr PEK release liner.	acrylic	PEK release liner	38 µ	63.5 µ
TM-1030	deep matte clear polyethylene film coated on one side with 25.5 µ of acrylic medical grade adhesive protected by 80 gr PEK release liner.	acrylic	PEK release liner	76 µ	100 µ
TM-5151	translucent matte polyurethane film coated on one side with a skin friendly breathable acrylic based adhesive protected by a 80 gr poly-coated release liner.	breatheable acrylic	poly-coated release liner	25.4 µ	50 µ
TM 8710	PET coated on two sides with a latex free, synthetic elastomer adhesive. The adhesive is protected by an 80 gr SCK release liner	synthetic elastomer adhesive	80 gr SCK with a silicone release coating on two sides.	12.7 µ	104 µ